Specifications - Denon AVR-2106 Operating Instructions Manual

Specifications

2 Audio section
• Power amplifier
Rated output: Front:
Center:
Surround:
Surround Back: 90 W + 90 W
Dynamic power: 120 W x 2 ch
170 W x 2 ch
200 W x 2 ch
Output terminals: Front:
Center, Surround, Surr.Back: 16 ~ 16
• Analog
Input sensitivity /
input impedance: 200 mV / 47 k /kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF-A weighted) (DIRECT mode)
Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output /
Maximum output: 150 mV / 7 V
Distortion factor: 0.03 % (1 kHz, 3 V)
90 W + 90 W
(8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
125 W + 125 W
(6 /ohms, 1 kHz with 0.7% T.H.D.)
90 W
(8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
125 W
(6 /ohms, 1 kHz with 0.7% T.H.D.)
90 W + 90 W
(8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
125 W + 125 W
(6 /ohms, 1 kHz with 0.7% T.H.D.)
(8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
125 W + 125 W
(6 /ohms, 1 kHz with 0.7% T.H.D.)
(8 /ohms)
(4 /ohms)
(2 /ohms)
A or B 16 ~ 16 /ohms
A + B 12 ~ 16 /ohms
/ohms
2 Video section
• Standard video terminals
Input / output level
and impedance: 1 Vp-p, 75
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
• S-Video terminals
Input / output level
and impedance: Y (brightness) signal — 1 Vp-p, 75
C (color) signal — 0.3 Vp-p, 75
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
• Color component video terminal
Input / output level
and impedance: Y (brightness) signal — 1 Vp-p, 75
P /C
B
P /C
R
Frequency response: DC ~ 100 MHz — +0, –3 dB
2 Tuner section
[FM] (note: µV at 75
Receiving Range: 87.50 MHz ~ 108.00 MHz
Usable Sensitivity: 1.0 µV (11.2 dBf)
50 dB Quieting
Sensitivity: MONO
STEREO
S/N (IHF-A): MONO
STEREO
Total Harmonic Distortion
(at 1 kHz): MONO
STEREO
2 General
Power supply: AC 230 V, 50 Hz
Power consumption: 450 W
Maximum external
dimensions: 434 (W) x 171 (H) x 417 (D) mm
Mass: 12.8 kg
2 Remote control unit (RC-1016)
Batteries: R6P/AA Type (two batteries)
External dimensions: 55 (W) x 225 (H) x 34.5 (D) mm
Mass: 165 g (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
54
/ohms
/ohms
/ohms
/ohms
(blue) signal — 0.7 Vp-p, 75 /ohms
B
(red) signal — 0.7 Vp-p, 75 /ohms
R
/ohms, [AM]
0 dBf=1 x 10 –15 W)
522 kHz ~ 1611 kHz
18 µV
1.6 µV (15.3 dBf)
23 µV (38.5 dBf)
77 dB (IHF-A weighted)
72 dB (IHF-A weighted)
0.15 % (1 kHz)
0.3 % (1 kHz)
Specifications