Grill Pan And Handle - Creda HBD130G Instruction & Installation Manual

GRILL PAN & HANDLE
The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
A
Step 1 Remove screw & washers from the grill pan bracket.
Step 2 Tilt the handle over the recess (a).
Step 3 Slide it towards the centre of the pan (b).
Step 4 Locate the handle over the bracket (c).
NOTE: Ensure that when using the grill pan handle in the detachable manner it is
centralised and secure.
The grill pan can be stored in the top compartment with the handle attached by
placing the shelf in the middle or lower position and tilting the grill pan over the
rear edge of the shelf.
B
For a fixed handle, replace screw & washers and ensure they are fully
tightened up. If a detachable handle is required, do not replace screw
& washers.
C
11