Adjusting The Volume; Turning The Power On And Off; Turning Off The Sound Temporarily - Denon AVR-1909 Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<ZONE2 ON/OFF>
<ZONE2/REC SELECT>
[Front]
[SOURCE
SELECT]
[VOLUME]
[MUTING]
[SOURCE
CONTROL 2]
[SOURCE
CONTROL 1]

Multi-zone Operations
BUTTON

Turning the Power On and Off

<BUTTON>
[BUTTON]
GOperation on the main unitH
<ZONE2 ON/OFF>
Press
<VOLUME>
When the power turns on, the multi-zone indicator (
the display.
GOperation on the remote control unitH
[ZONE2 ON] [ZONE2 OFF]
Press or
[SOURCE SELECT]
• Also press
turns on.
• When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing
Selecting the Input Source
[Rear]
GOperation on the main unitH
[ZONE2 OFF]
<ZONE2/REC SELECT>
q Press
[ZONE2 ON] <SOURCE SELECT>
w Turn
[MAIN ON]
GOperation on the remote control unitH
[MAIN OFF]
[SOURCE CONTROL 1]
q Set
[SOURCE
to "ZONE2".
[SOURCE SELECT]
SELECT] w Press
.
) lights on
.
when in standby mode, the power
[MAIN ON] [MAIN OFF]
or .
and select the zone to be adjusted.
.
[SOURCE CONTROL 2]
to "AUDIO" and
.

Adjusting the Volume

GOperation on the main unitH
<ZONE2/REC SELECT>
and select the zone to be adjusted.
q Press
<VOLUME>
to adjust.
w Turn
GOperation on the remote control unitH
[SOURCE CONTROL 1]
to "AUDIO" and
q Set
to "ZONE2".
[VOLUME]
.
w Press
[Variable range] – – – –70dB ~ –40dB ~ +18dB
• The volume can be increased up to the value set at menu "Manual
Setup" – "ZONE2 Setup" – "Volume Limit" (vpage 29).
• The ZONE2 volume can be adjusted only when "ZONE2" is selected
at menu "Manual Setup" – "Option Setup" – "Amp Assign"
(vpage 29).

Turning off the Sound Temporarily

[SOURCE CONTROL 1]
to "AUDIO" and
q Set
to "ZONE2".
[MUTING]
.
w Press
The sound is reduced to the level set at menu "Manual Setup"
– "ZONE2 Setup" – "Mute Level" (vpage 29).
To cancel, either adjust the volume or press
The setting is canceled when the zone's power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL, OPTICAL or HDMI
connectors cannot be played in multi-zone.
[SOURCE CONTROL 2]
[SOURCE CONTROL 2]
[MUTING]
again.