Listening To Preset Stations - Denon AVR-1909 Owner's Manual

Playing Video and Audio
Equipment
Basic Operation
1
Prepare the equipment.
q Load the BD, DVD, CD or other software in the player.
(vSee the operating instructions of the respective equipment.)
w To play a video equipment, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use to select the input source.
3
Start playback.
(vSee the operating instructions of the respective equipment.)
The remote control unit can be used to operate external devices.
See "Remote Control Unit Operations" (vpage 56).
Listening to FM/AM Broadcasts
Basic Operation
1
<SOURCE SELECT>
Either turn or press
select "TUNER".
2
[SOURCE CONTROL 1]
Set to "AUDIO" and
CONTROL 2]
to "TUNER".
(vpage 56 "Remote Control Unit Operations")
3
BAND
Press to select "FM" or "AM".
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
[MODE]
Press to light the "AUTO" indicator on the display, then
TUNING
use to select the station you want to hear.
w To tune in manually (Manual Tuning)
[MODE]
Press to turn off the display's "AUTO" indicator, then use
TUNING
to select the station you want to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
frequencies continuously.
• The time (default : 30 sec) for which the on-screen display are
displayed can be set at menu "Manual Setup" – "Option Setup"
– "On-Screen Display" (vpage 30).
Press uio p to return to the original screen.
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can
tune them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
[MEMORY]
Press .
3
SHIFT
Press to select the block (A to G) in which the
station is to be preset.
4
<PRESET>
Press or
number (1 to 8).
5
[MEMORY]
Press again to complete the setting.
[TUNER]
to
[SOURCE
• To preset other stations, repeat steps 1 to 5.
• Stations can be preset automatically at menu "Input Setup" – "Auto
Preset" (vpage 33).
NOTE
Preset stations are erased by overwriting them.
1
TUNING
to change
2
n Default settings
[CHANNEL + –]
to select the preset

Listening to Preset Stations

SHIFT
Press to select the memory block (A to G).
<PRESET> [CHANNEL + –]
Press or
desired preset channel (1 to 8).
Auto tuner presets
87 .5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
A1 ~ A8
90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 ~ B8
90.1 / 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
ENGLISH
to select the