Lexicon RV8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual page 19

Lexicon, Inc.
RV-8 Serial Communications Protocol
7.3.13.1 Command Packet Description
Application Header:
Command MC_GET_PARAM_BY_ID
Data Count 2
Application Data:
Data[0]
Data[1]
7.3.13.2 Data Description
ParamId:
Data Type:
Max Value:
7.3.13.3 Data Validation:
If the ParamId is not a valid Id the RV8 will respond with a NAK packet and error code DC_
INVALID_PARAM_ID.
7.3.13.4 Parameter Definition Response Packet
The following Packet has been defined as follows for RV8 V1.00. Future releases may modify this
definition.
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
Data[5]
Data[6]
Data[7-27]
Data[28]-Data[108]
Data[108]
7.3.13.5 Data Description
ParamId:
Data Type:
Max Value:
© 2004 Lexicon, Inc. All rights reserved.
ParamId(LSB)
ParamId(MSB)
Unsigned 16 bit Integer
Max Parameter Count as reported by the RV8 Unit Configuration Response
Packet in 7.3.16.2
MC_SYS_PARAM_DEF_PKT 0x8F
110
ParamId(LSB)
ParamId(MSB)
ParamType
MAX Value(LSB)
MAX Value(MSB)
MIN Value(LSB)
MIN Value(MSB)
CurrentValue[0 -20]
Parameter Path
Read Only
Unsigned 16 bit Integer
Max Parameter Count as reported by the RV8 Unit Configuration Response
Packet in 7.3.16.2
Printed on: 01/18/05
0x35
0x02
nn
nn
0x6E
nn
nn
nn
nn
nn
nn
nn
nn nn nn...
ch ch ch ...
0x00
nn
19 of 74