Set Zone 2 Volume; Set Zone 2 Left/Right Balance - Lexicon RV-8 V2.0 - SERIAL PROTOCOL DEFINITIONS REV 1-8 Manual

Lexicon
7.3.27.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the RV-8 will ignore the
command and transmit a NAK command with an error code DC_INVALID_DATA.

7.3.28 Set Zone 2 Volume

Commands RV-8 to set the Zone 2 volume with the value in this packet.
7.3.28.1 Command Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
7.3.28.2 Data Description
Value:
Data Type:
Max:
Min:
7.3.28.3 RV-8 Response
The RV-8 will assign the value from the packet to the Zone 2 volume.
7.3.28.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the RV-8 will ignore the
command and transmit a NAK command with an error code DC_INVALID_DATA.

7.3.29 Set Zone 2 Left/Right Balance

Commands RV-8 to set the Zone 2 balance to the value in this packet.
7.3.29.1 Packet Description
Application Header:
Command
Data Count 1
Application Data:
Data[0]
MC_CMD_SET_ZONE2_VOLUME
Value
Signed 8-bit integer (2's compliment)
+12 (0x0C) (12dB)
-80 (0xB0) (-80 dB)
MC_CMD_SET_ZONE2_BALANCE
Value
RV-8 Serial Communications Protocol
0x45
0x01
nn
0x46
0x01
nn
37