NETGEAR MBR1210-1BMCNS - This Product is a Special Offering User Manual page 62

To restrict access based on MAC addresses:
1. From the main menu, under Advanced, select Wireless Settings. Click Setup Access
List to display the Wireless Station Access List screen.
2. Select Turn Access Control On check box. Adjust the list as needed for your network.
You can add devices to the Trusted Wireless Stations list. Click Add to display the following
screen:
3.
You can add devices to the list using either of the following methods:
•
If the computer is in the Available Wireless Cards table, select its radio button to
capture its MAC address.
•
Use the Wireless Card Entry fields to enter the MAC address of the device to be
added. The MAC address can usually be found on the bottom of the wireless device.
•
If no device name appears when you enter the MAC address, you can type a
descriptive name for the computer that you are adding.
4. Click Apply to save these settings. Now, only devices on this list will be allowed to wirelessly
connect to the router.
62 | Chapter 5. Advanced
Mobile Broadband 11n Wireless Router MBR1210 User Manual