NETGEAR MBR1210-1BMCNS - This Product is a Special Offering User Manual page 22

Table 5. Ethernet Broadband Settings Fields When Login Not Required
Fields and Check Boxes
Account Name (If Required)
Domain Name (If Required)
Internet IP Address
Domain Name Server (DNS)
Address
Router MAC Address
22 | Chapter 1. Connecting to the Internet
Mobile Broadband 11n Wireless Router MBR1210 User Manual
Description
This is also known as the host name or system name.
For most users, type your account name or user name in this field. For
example, if your main mail account is JerAB@ISP.com, then put JerAB
in this field.
If your ISP has given you a specific host name, then type it (for
example, CCA7324-A).
For most users, you can leave this field blank, unless required by your
ISP. You can type the domain name of your ISP. For example, if your
ISP's mail server is mail.xxx.yyy.zzz, you would type xxx.yyy.zzz as the
domain name.
If you have a domain name given to you by your ISP, type it in this field.
(For example, Earthlink Cable might require a host name of home, and
Comcast sometimes supplies a domain name.)
If you have a cable modem, this is usually the workgroup name.
If you log in to your service or your ISP did not provide you with a fixed
IP address, the router finds an IP address for you automatically when
you connect. Select Get Dynamically From ISP.
If you have a fixed (or static IP) address, your ISP has provided you
with the required information. Select Use Static IP Address and type
the IP address, subnet mask and gateway IP address into the correct
fields.
For example:
• IP Address . 24.218.156.183
• Subnet Mask . 255.255.255.0
• Gateway IP Address . 24.218.156.1
The DNS server is used to look up site addresses based on their
names.
• If your ISP gave you one or two DNS addresses, select Use These
DNS Servers and type the primary and secondary addresses.
• Otherwise, select Get Automatically From ISP .
Note: If you get "Address not found" errors when you go to a website, it
is likely that your DNS servers are not set up correctly. You should
contact your ISP to get DNS server addresses.
Your computer's local address is its unique address on your network.
This is also referred to as the computer's MAC (Media Access Control)
address.
• Usually, select Use Default MAC Address .
• If your ISP requires MAC authentication, then select either Use
Computer MAC Address to disguise the router's MAC address with
the computer's own MAC address, or Use This MAC Address to
manually type the MAC address for a different computer.
The format for the MAC address is XX:XX:XX:XX:XX:XX. This value
might be changed if Use Computer MAC Address is selected once a
value has already been set in the Use This MAC Address selection.