Table of Contents
Advertisement
Table 9.4 Application Filter configuration parameters
Filter Type
You can select the Filter Type from the drop down list.
Filter Name
Type the Filter name that you would like to add.
Protocol
You can select the protocol from the drop down list.
Port
Type the port number. For example, if you're adding a HTTP filter the port
would be 80
Log
You can enable or disable logging of messages whenever Broadband
Gateway denies or allows a packet based on the filter that you've set. By
clicking on enable you'd enable logging of such messages.
Commands
You can refer to the commands by clicking on the [Help] button.
* FTP: You can filter any or all of FTP commands such as PORT, RETR, STOR, PASV etc.
* HTTP: You can filter certain file extensions such *.java, *.ocx etc.
* SMTP: You can filter any or all of SMTP commands such as VRFY
* RPC: You can filter the specified RPC program numbers
Figure 9.9 Application Filter Configuration
ASUS VPN ADSL Router
Chapter 9
79
Advertisement
Table of Contents
