Table of Contents
Advertisement
Chapter 9
9.7.1 Options in Service Configuration Page
Table 9.3 describes the available configuration parameters for firewall service list.
Table 9.3. Service List configuration parameters
Service Name
Enter the name of the Service to be added. Note that only alphanumeric
characters are allowed in a name.
Protocol
Enter the type of protocol the service uses.
Port
Enter the port number that is set for this service.
9.7.2 Add a Service
To add a service, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall menu,
and then click Service submenu. The Firewall Service Configuration
page displays, as shown in Figure 9.7.
Note that when you open the Service Configuration page, a list of
existing services are also displayed in the lower half of the con-
figuration page such as those shown in Figure 9.7.
2. Select "Add New" from the service drop-down list.
3. Enter a desired name, preferably a meaningful name that signifies the
nature of the service, in the "Service Name" field. Note that only al-
phanumeric characters are allowed in a name.
4. Specify any or all of the following fields: public port and protocol.
Please see Table 9.3 for explanation of these fields.
5. Click on the [Add] button to create the new service. The new service
will then be displayed in the service list table at the lower half of the
Service Configuration page.
9.7.3 Modify a Service
To modify a service, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall menu,
and then click Service submenu.
74
ASUS VPN ADSL Router
Advertisement
Table of Contents
