Asus SL6000 User Manual page 122

Appendix
Configuration Manager Program
You forgot/lost your Configuration Manager user ID or password.
If you have not changed the password from the default, try using "admin" as
both the user ID and password. Otherwise, you can reset the device to the
default configuration by pressing the Reset button on the rear panel of SL6000/
SL6300 three times. WARNING: Resetting the device removes any custom
settings and returns all settings to their default values.
Cannot access the Configuration Manager program from your browser.
Use the ping utility, discussed in the following section, to check whether your
PC can communicate with the SL6000 / SL6300's LAN IP address (by default
192.168.1.1). If it cannot, check the Ethernet cabling.
Verify that you are using Internet Explorer v5.5 or later. Netscape is not
supported. Support for Javascript® must be enabled in your browser. Support
for Java® may also be required.
Verify that the PC's IP address is defined as being on the same subnet as the IP
address assigned to the LAN port on the SL6000 / SL6300.
Changes to Configuration Manager are not being retained.
Be sure to click on Apply button to save any changes.
ASUS VPN ADSL Router 121