Table of Contents
Advertisement
5.
Click the Browse button.
An operating system-specific dialog box displays allowing you to find the file containing
the updated firmware.
6.
Navigate to the file containing the updated firmware and select it.
For most operating systems, you highlight the file and click an Open button.
The operating system-specific dialog box closes and the Update Firmware dialog box
refreshes with the name of the file entered in the File Name field.
7.
Click the Upload button.
The firmware file uploads to your ReadyNAS system. After a few moments, the Update
Firmware dialog box refreshes with details about the new firmware.
8.
Click the Install button.
You are prompted to reboot your ReadyNAS system to complete the firmware installation.
9.
Reboot your ReadyNAS system.
If you enabled email alerts, your ReadyNAS system sends a message when the firmware
update finishes.
Power Timer
You can configure your ReadyNAS system to power itself on and off automatically according to a
schedule. Note that if you schedule this device to power off, data transfers will be interrupted and
pending backup jobs will not run.
To enable the power timer:
1.
Select Configure > System > Power.
The Power screen displays.
ReadyNAS for Home RAIDiator 5.3
Monitor and Maintain
74
Hide quick links:
Advertisement
Table of Contents
