NETGEAR RND4475 - ReadyNAS NV+ NAS Server Software Manual page 39

3. Connect to your ReadyNAS system as follows:
• To use the AFP file-sharing protocol, enter the following command in the Server
Address field:
afp://<host_name>
• To use the SMB file-sharing protocol, enter the following command in the Server
Address field:
smb://<host_name>
In both cases, <host_name> is the name that you assigned to your ReadyNAS
system or the default host name if you did not change it.
4. Click the Connect button.
You are prompted to log in to your ReadyNAS system.
5. Enter a user ID and password.
You can log in with administrator or user credentials. If you log in as a user, your access is
limited by the settings configured by the ReadyNAS system administrator for that user.
You are prompted to select a volume. Mac OS X calls your ReadyNAS shares volumes.
6. Select a volume or volumes (share or shares) and click the OK button.
Finder displays the volume contents in a window.
ReadyNAS for Home RAIDiator 5.3
Shares
39