➏ ➏ ➏ ➏
Check Aggressive Mode.
➋ ➋ ➋ ➋
Select DNS and enter the router's
Remote Identifier Information.
➌ ➌ ➌ ➌
Select DNS and enter the router's
Local Identifier Information.
Click OK to go back to the Phase1
(Authentication) screen.
Click Save & Apply to save the
settings
➋ ➋ ➋ ➋
➌ ➌ ➌ ➌
A new policy should be added
under Root.
Verify the Remote Gateway to
make sure that it is the remote
Router's WAN IP or FQDN.
Click on the policy name, then
select the P1 Advanced button.
Page 7 of 8
Version 1.2