Setup For Microsoft Networks (Smb) - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual

Setup for Microsoft Networks (SMB)

This chapter describes the setup for Microsoft and IBM networks
running SMB (Server Message Block). SMB is a protocol that
makes use of NetBIOS. NetBIOS can be transported over different
network protocols. The HP SureStore CD/DVD-ROM server
supports the following transport methods automatically:
•
SMB over NetBIOS/NetBEUI
(NetBIOS Extended User Interface)
•
SMB over NetBIOS/TCP/IP
(also called NBT)
Clients using SMB could be running Windows 95 or 98,
Windows NT, Windows for Workgroups, OS/2, UNIX, or DOS.
This chapter includes examples of procedures for such client
systems. You may need to refer to your network operating system
manuals for assistance with specific procedures.
If you are running TCP/IP on your network as well as SMB, refer to
chapter 3 to assign the IP address to the server (the "Set the
IP Address for the Server" section from page 3-1 to page 3-8) before
granting access to clients.
Following that section of chapter 3 are instructions for setting
up access to the discs and configuring the server (starting on
page 3-9). For IP and HTTP installations, we recommend use of
those instructions for client access and configuration in addition
to the methods following in this chapter.
Setup for Microsoft Networks (SMB) 4
4
-
1