Using Cluster Administrator; Using Cluster Administrator Remotely; The Hp Storage Server Management Console; Creating A Cluster - HP DL320s - ProLiant 9TB SATA Storage Server NAS User Manual

Using Cluster Administrator

Cluster Administrator shows information about the groups and resources on all of your clusters and
specific information about the clusters themselves. A copy of Cluster Administrator is automatically
installed on a cluster node when the Cluster service is installed.

Using Cluster Administrator remotely

For remote administration, copies of Cluster Administrator can be installed on other computers on your
network. The remote and local copies of Cluster Administrator will be identical. It is also possible to
administer an HP ProLiant Storage Server cluster remotely from a computer running Windows NT 4.0
Service Pack 3 or later, Windows 2000 or Windows 2003 using the Cluster Administrator tool.

The HP Storage Server Management Console

Cluster Administrator is available from the HP Storage Server Management Console under the Utilities
folder. The HP Storage Server Management Console is accessible using Remote Desktop or a web
browser.

Creating a cluster

During the creation of the cluster, Cluster Administrator will analyze and verify the hardware and software
configuration and identify potential problems. A comprehensive and easy-to-read report is created, listing
any potential configuration issues before the cluster is created.
Some issues that can occur are:
• No shared disk for the Quorum disk. A shared disk must be created with a NTFS partition at
least 50 MB in size.
• Use of DHCP addresses for network connections. All Network adapters must be configured with
static IP addresses in a cluster configuration.
• File Services for Macintosh and Service for NetWare are not supported in a cluster configuration.
• Dynamic Disks are not supported in a cluster configuration.
• Errors appear on a network adapter that is not configured or does not have an active link. If the
network adapter is not going to be used it should be disabled.

Adding nodes to a cluster

Only the Quorum disk should be accessible by the new node while the new node is not a member of the
cluster. The new node should not have access to the other LUNs in the cluster until after it has joined the
cluster. After the node has joined the cluster, the LUNs may be presented to the new node. Move the
physical disk resources over to the new node to confirm functionality.
CAUTION:
Presenting other LUNs to the non-clustered system could lead to data corruption.

Geographically dispersed clusters

Cluster nodes can be geographically dispersed to provide an additional layer of fault tolerance.
Geographically dispersed clusters are also referred to as stretched clusters.
The following rules must be followed with geographically dispersed clusters:
• A network connection with latency of 500 milliseconds or less ensures that cluster consistency
can be maintained. If the network latency is over 500 milliseconds, the cluster consistency
cannot be easily maintained.
108
Cluster administration