Table of Contents
Advertisement
User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511 v2
For Windows 2000 & 98SE/Me Users Installing a WG511 v2
1. First, install the WG511 v2 software.
a. Insert the NETGEAR CD. If the CD main
page does not appear, double click
autorun.exe on the CD.
b. Click the Install Driver & Utility link and
the Smart Wizard starts.
c. Follow the Wizard steps and click Next to
continue.
2. Now, insert the wireless adapter.
Follow the Windows prompts, and if instructed
to restart your computer, do so.
You will be prompted to choose the country you are located in. Select your location from the
list.
3. Use the Smart Wizard to set up your wireless adapter.
You will be asked if you want the Connection Wizard to
guide you (recommended).
a. Click Finish to accept.
The Connection Wizard will show your progress and
record your choices
b. Select the wireless network from the dropdown list.
Note: Hidden networks do not broadcast the
Network Name (SSID). These networks are included
in the dropdown list, but the Network Name (SSID)
is blank.
If the network uses security then the Smart Wizard
detects it.
c. Follow the Smart Wizard steps for Security (if used)
and for saving a Profile.
d. After you have reviewed the settings, click Finish.
2-6
June 2005
Basic Setup
Advertisement
Table of Contents
