NETGEAR WG511 Installation Manual

Netgear Wireless Adapter Smart Wizard
These setup instructions assume that you will connect to an access point or
wireless router.
Estimated Completion 10 minutes.
Windows XP Installation
1. First, install the wireless adapter software.
Insert the NETGEAR CD. If the
CD main page does not appear,
double click autorun.exe on
the CD.
a. Click the Install Driver &
Utility link and the Smart
Wizard starts.
b. Follow the Wizard steps, and
click Next to continue.
c. The Connection Wizard opens
and prompts you to insert the
wireless adapter.
2. Now, insert the wireless
adapter.
You will be prompted to choose the
country you are located in. Select
your location from the list.
3. Use the Smart Wizard to set up your wireless adapter.
a. Choose to configure your wireless adapter either with the NETGEAR
Smart Wizard (recommended) or the Windows configuration utility.
Note: If you choose the Windows
Zero Configuration option, you
must read the Windows XP
documentation for setup and
configuration instructions.
b. Click Next to accept the NETGEAR
Smart Wizard.
You will be prompted to let the
Connection Wizard guide you
(recommended).
c. Click Finish to accept.
d. Select the wireless network from the
dropdown list, and the wizard
records your choice.
Note: Hidden networks do not
broadcast the Network Name
(SSID). These networks are included
in the dropdown list, but the Network
Name (SSID) is blank.
If the network uses security, then the
Smart Wizard detects it.
e. Follow the Wizard steps for Security (if used) and for saving a Profile.
f. After you have reviewed the settings, click Finish.
The Connection Wizard initiates your wireless connection. It could take up to
a minute for your wireless connection to be established.
4. Use the status bar to verify your wireless connectivity.
Connection
Status
Internet/Router Unlocked: Network does not use security
Locked: Network uses security
connection indicator
• The connection status indicator and the system tray icon
lower right of the Windows task bar show the status of the connection. Click
the Help button or refer to the Reference Manual on the CD for details on how
to interpret these icons.
• Use the status information at the bottom of the utility verify your wireless
network connection. Click the Help button to view the online help.
• Check the wireless adapter LEDs: Green (Link light): Blinking indicates the
WG511 is trying to establish a connection but is unable to do so. Amber
(Activity light): Blinking indicates the wireless adapter has a connection and
is transmitting or receiving data.
• The Internet/Router connection indicator displays indicators that identify the
progress of your connection.
Connection Indicator Description
Connected to Internet Wireless Internet connection OK.
Connected to Router Wireless connection to router OK
but no Internet connection at router.
___.___.___.___ or Wireless connection to a router OK
169.254..x.x but problem with the router.
Signal
strength
indicator.
on the