Drive0 Submenu Of The System Menu - Fujitsu M2010 - Mini-Notebook - Atom 1.6 GHz Bios Manual

Drive0 Submenu of the System Menu

The Drive0 submenu identifies what ATA devices are installed.
Drive0:
Type:
Model:
Capacity:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options
■
Drive0: Disabled
■
Enabled
Type:
---
Model:
---
Capacity: ---
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Phoenix TrustedCore(tm) Setup Utility
System
Drive 0: [FUJITSU MHZ2160BH G2-(S1)]
[Enabled]
Hard Disk
FUJITSU MHZ2160BH G2-(S1)
160GB SATA1
Select Item -/Space
Select Menu Enter
Figure 3. Drive0 Master Submenu
Default Description
[Enabled] Allows you to enable or disable the hard disk drive.
--- The type of drive identified as Drive0.
--- The model of your hard disk
--- The maximum capacity of your hard disk
S y s t e m M e n u
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
7