Default Description; Exiting From The Security Menu - Fujitsu M2010 - Mini-Notebook - Atom 1.6 GHz Bios Manual

M S e r i e s M i n i - N o t e b o o k B I O S
Table 5: Fields, Options and Defaults for the Security Menu
Menu Field Options
Supervisor –—
Password is:
User Password is: –—
Set Supervisor –—
Password
Set User Password –—
■
Password on Boot: Disabled
■
Enabled

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
10
Default Description
Clear A display-only field. Set is displayed when the system supervisor password is
set and Clear when it is not.
Clear A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter] Sets, changes or cancels the Supervisor Password. The Supervisor Password
may be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a Supervisor Password is set
it must be used to access the BIOS setup utility.
[Enter] This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. A User Password may be up to seven
characters long and must include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive. To cancel a password press [Enter] key instead
of entering characters in the Enter New Password field and in the Re-enter
New Password field. When a User Password is set it must be used to access
the BIOS setup utility.
[Disabled] When enabled, a password is required upon boot. When set to Disabled no
password is required.