Drive0 Submenu Of The System Menu - Fujitsu Lifebook A1110 Guide Bios Manual

Drive0 Submenu of the System Menu

The Drive0 submenu identifies what ATA devices are installed.
Info
Drive0:
Type:
Model:
Capacity:
F1 Help
ESC Exit
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options
Drive0: Disabled
Enabled
Type:
---
Model: ---
Capacity: ---
Phoenix SecureCore(tm) Setup Utility
System Advanced
Drive0 [FUJITSU MHZ2250BH G2]
[Enabled]
Hard Disk
FUJITSU MHZ2250BH G2
250GB
(250,056,030,208 Bytes)
Select Item -/Space
Select Menu Enter
Figure 3. Drive0 Master Submenu
Default
[Enabled]
---
---
---
Security Boot Exit
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Change Values
Select Sub-Menu
Description
Enables or disables Drive0.
Displays the drive device type in Drive0. This field is for information only.
Displays the model number of the device in Drive0. This field is for
information only.
Displays the maximum capacity of your hard disk. This field is for
information only.
S y s t e m M e n u
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
7