System Menu - Setting Standard System Parameters - Fujitsu M2010 - Mini-Notebook - Atom 1.6 GHz Bios Manual

SYSTEM MENU – SETTING STANDARD SYSTEM PARAMETERS
The System Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information.)
The following tables show the names of the menu fields
for the System menu and its submenus, all of the options
for each field, the default settings and a description of
Info
System Time:
System Date:
Drive0
F1 Help
ESC Exit
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system's configuration.
Menu Field Options
System Time: –—
System Date: –—
Phoenix TrustedCore(tm) Setup Utility
System Advanced Security
[XX:XX:XX]
[XX/XX/2008]
[FUJITSU MHZ2160BH G2-(S1)]]
Select Item -/Space
Select Menu Enter
Figure 2. System Menu
Default
–—
–—
S y s t e m M e n u
the field's function and any special information needed
to help understand the field's use.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or type time or date from the MS-DOS
prompt.
Boot Exit
Item Specific Help
Adjust calendar clock.
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Change Values F9
Select Sub-Menu F10
Description
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits for
year. (MM/DD/YYYY) for example: 03/20/2008. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
Setup Defaults
Save and Exit
5