Table of Contents
Advertisement
The FTM-10SR has two methods of performing Memory Channel Scan; (1) All Memory
Channel Scanning and (2) Scanning only memory channels which are selected via the Skip/
Preferential memory setting (see next step).
1. Press the front panel
2. Press and hold the
mode.
3. Rotate the DIAL knob to select Menu Item "M5 SCN TYPE".
4. Press the
key briefly.
5. Rotate the DIAL knob to select desired Scan Type:
The FTM-10SR scans on all Memory Chan-
ALL MEM:
nels.
ONLY MEM: The FTM-10SR scans only the memory chan-
nels that are appended with the "ONLY" flag
via the Skip/Preferential memory setting.
6. Press the [ VOL/SEL ] key to return to the memory recall
mode. The memory channel frequency will now be displayed.
S
The FTM-10SR allows you to set up a "Preferential Scan List". You can "flag" channels
within the memory system. When you initiate the Preferential Memory Scan, only "flagged"
channels will be scanned.
1. Recall the memory channel that you wish to skip. (or Preferential Memory Channel).
2. Press and hold the
mode.
3. Rotate the DIAL knob to select Menu Item "M6 SKIPONLY".
4. Press the
key briefly.
5. Rotate the DIAL knob to select the desired Scan Type:
SKIP: This memory channel is skipped during memory
channel scans.
ONLY: This memory channel scans during preferential
memory scans.
OFF: This memory channel scans during memory chan-
nel scan.
6. Press the [ VOL/SEL ] key to return to the memory recall mode. The memory channel
frequency will now be displayed.
FTM-10SR O
PERATING
S
CAN
key to switch to the Memory mode, if needed.
key for one second to enter the Memory Channel Customization
/P
KIP
REFERENTIAL
key for one second to enter the Memory Channel Customization
M
ANUAL
M
EMORY
T
YPE
S
S
CAN
ETTING
O
PERATION
39
Advertisement
Table of Contents
