I
NSTALLATION
Front Panel Installation
Use the supplied Front Panel Bracket
1. Mount the supplied
Front Panel Bracket to
any suitable position us-
ing the supplied screws.
Use the supplied Magnet
1. Connect the supplied Magnet and
Front Panel Hanger using the sup-
plied screw .
If the protective film is not affixed to the magnet, it may damage the mounting
surface.
Damage is possible even if the protection film is attached.
Be careful handling the hanger. The strong magnet could pinch your fingers.
Even with the strong magnet, it is possible to displace the bracket.
The magnet may destroy data on banking & identification cards.
18
C
ONNECTION AND
2. Connect the supplied
Front Panel Hanger
using the supplied
screw.
Magnet
CAUTION!
S
ETTING
3. Install the Front Panel
into the Front Panel
Bracket.
2. Affix the supplied Protection Seal to
the Magnet.
FTM-10SR O
Protection Seal
M
PERATING
ANUAL