Cutting Component Inspection - Alamo Industrial Exten-A-Kut II Operator's Manual

• Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn and missing blades as
complete sets to maintain rotary balance during
operation.
• Ensure carrier hub nut is tightened with the
cotter pin inserted and spread. OPS-R-0041

9.3 Cutting Component Inspection

Inspect blade pan and blade assembly for the following:
OPS-U-0031
EK II 03/09
©2009 Alamo Group Inc.
OPERATION
Operation Section 3-20