Yaesu FT-2000D Operating Manual page 29

F
RONT
( VFO-A ) BAND Switch
Pressing this button allows you to select the Main
(VFO-A) operating band (Amateur bands) using the
[ SUB VFO-B ] knob.
( VFO-A ) MHz Switch
Pressing this button allows you to tune the Main band
(VFO-A) frequency down or up in 1 MHz increments,
using the [ SUB VFO-B ] knob.
GRP Switch
Pressing this button allows you to select the memory
group using the [ SUB VFO-B ] knob.
M CH Switch
Pressing this button allows you to select the memory
channel using the [ SUB VFO-B ] knob.
( VFO-B ) BAND Switch
When the [ A/B ] button is pressed, and the Orange lamp
to the right of the [ SUB VFO-B ] knob lights up, press-
ing this button allows you to select the Sub (VFO-B)
operating band (Amateur bands) using the [ SUB VFO-
B ] knob.
FT-2000D O
PERATING
P
ANEL
M
ANUAL
C
ONTROLS
( VFO-B ) MHz Switch
When the [ A/B ] button is pressed, and the Orange lamp
to the right of the [ SUB VFO-B ] knob lights up, press-
ing this button allows you to tune the Sub band (VFO-
B) frequency down or up in 1 MHz increments, using
the [ SUB VFO-B ] knob.
FAST Switch
When the [ A/B ] button is pushed, and the Orange lamp
to the right of the [ SUB VFO-B ] knob lights up, the
[ SUB VFO-B ] knob will be controlling the Sub band
(VFO-B) frequency; pressing the [ FAST ] button will
change the tuning step to 100 Hz.
A/B Switch
The [ A/B ] button determines whether the actions of
the [ SUB VFO-B ] knob will be applied to the Main
band (VFO-A) or the Sub band (VFO-B).
Pressing this button once causes the Orange lamp to
the right of the [ SUB VFO-B ] knob to light up; in this
case, rotation of the [ SUB VFO-B ] knob affects op-
eration on the Sub band (VFO-B). Pressing the [ A/B ]
button once more causes the Orange lamp to turn off;
in this instance, rotation of the [ SUB VFO-B ] knob
affects operations associated with the Main band (VFO-
A).
& S
WITCHES
Page 27