Tuning Group; Tun Dialstp; Tun Cw Fine; Tun Mhz Sel - Yaesu FT-2000D - MENU MODE LIST Manual

SCOPE G
112 SCP 14.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 20 m amateur
band.
Available Values: (1)4.000 - (1)4.349 MHz (1 kHz/step)
Default Setting: (1)4.000 MHz
113 SCP 18.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 17 m amateur
band.
Available Values: (1)8.000 - (1)8.199 MHz (1 kHz/step)
Default Setting: (1)8.068 MHz
114 SCP 21.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 15 m amateur
band.
Available Values: (2)1.000 - (2)1.449 MHz (1 kHz/step)
Default Setting: (2)1.000 MHz
115 SCP 24.8 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 12 m amateur
band.
Available Values: (2)4.800 - (2)4.989 MHz (1 kHz/step)
Default Setting: (2)4.890 MHz
116 SCP 28.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 10 m amateur
band.
Available Values: (2)8.000 - (2)9.699 MHz (1 kHz/step)
Default Setting: (2)8.000 MHz
117 SCP 50.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 6 m amateur band.
Available Values: (5)0.000 - (5)3.999 MHz (1 kHz/step)
Default Setting: (5)0.000 MHz
FT-2000D O
PERATING
ROUP
M
ANUAL
M
TUNING G

118 tun DIALSTP

Function: Setting of the Tuning Dial knob's tuning speed
except the FM and FM-PKT modes.
Available Values: 1 / 5 / 10 Hz
Default Setting: 10 Hz

119 tun CW FINE

Function: Enabling/disabling of the "Fine" tuning speed
in the CW, RTTY, and PKT-SSB modes.
Available Values: EnA (ENABLE) / diS (DISABLE)
Default Setting: diS (DISABLE)
EnA (ENABLE): Tuning in 1 Hz steps on the CW,
RTTY, and PKT-SSB modes.
diS (DISABLE): Tuning according to the steps deter-
mined via menu item "118 tun
DIALSTEP."

120 tun MHz SEL

Function: Selects the tuning steps for the [ SUB VFO-B ]
knob when the [ MHz ] button is pressed.
Available Values: 1 / 0.1 MHz
Default Setting: 1 MHz

121 tun AM STEP

Function: Selects the tuning steps for the microphone's
[ UP ] / [ DWN ] keys in the AM mode.
Available Values: 2.5 / 5 / 9 / 10 / 12.5 kHz
Default Setting: 5 kHz

122 tun FM STEP

Function: Selects the tuning steps for the microphone's
[ UP ] / [ DWN ] keys in the FM and FM-PKT modes.
Available Values: 5 / 6.25 / 10 / 12.5 / 20 / 25 kHz
Default Setting: 5 kHz

123 tun FM DIAL

Function: Setting of the Tuning Dial knob's tuning speed
in the FM mode.
Available Values: 10 / 100 Hz
Default Setting: 100 Hz

124 tun MY BAND

Function: Programs a band to be skipped while selecting
bands using the [ SUB VFO-B ] knob.
Available Values: 1.8 ~ 50 / GE / AU
Default Setting: ---
To program the band to be skipped, rotate the [ SUB VFO-
B ] knob to recall the band to be skipped while selecting
bands via the [ SUB VFO-B ] knob, then press the [ ENT ]
button to change this setting to "ON" (a "d d d d d " notation will
replace the "E E E E E " notation). Repeat the same procedures to
cancel the setting (skipped "Off": "d d d d d " notation appears).
M
ENU ODE
ROUP
Page 127