To Fax - Oki C3530nMFP Handy Reference

Walk-Up Operation
Copy / Scan / Fax (cont.)

To Fax

Note
These instructions assume that
all needed basic data (e.g., date
and time) has already been
programmed into the system.
1. Load the document (see p. 4).
1. If prompted [Enter PIN], key in
your PIN number and press the
Enter key (
2. Press the Down arrow key to
highlight [Fax
3. Press the Enter key.
Note:
To send a fax now, select "Fax
no." and key in the fax
destination number manually,
then press the Start Color or
Start Mono key.
4. Make your settings* on the
display using the Up, Down, Left
and Right Arrow keys and the
Enter key.
5. Press the Start Color or Start
Mono key.
).
] .
See the on-line User's Guide on the CD
supplied with your system or check with
your system administrator for more
information.
Check dest.
Fax no.
Phone Book
Standard
Density : 0
A4
Delayed
Time
9
English
•
*Fax Mode Settings
Use to check the fax
No(s). to which the fax is
scheduled to be sent. To
set up the list of
numbers—or add to it—
use the Fax no. and
Phone Book settings
below.
Enter fax destination
number(s) manually.
Select fax number(s)
from a pre-programmed
phone book.
Set the resolution to be
used for the fax
transmission (Standard,
Fine, Extra Fine, Photo).
Set the print density
higher or lower.
Set the print media size
(A4, Letter, Legal).
Set the date and time
you wish the fax to be
transmitted.