Harmony Footswitch; Guitar Tuner - DigiTech VOCALIST LIVE 2 Owner's Manual

Harmony Footswitch

This footswitch turns the harmonies on or off. While one or two harmonies can be selected with
the HARMONY SELECT buttons, the HARMONY footswitch activates or deactivates any
selected harmonies simultaneously.
When the LED above the HARMONY footswitch is illuminated, the harmonies are on. When the
LED is turned off, the harmonies are turned off.

Guitar Tuner

Since the Vocalist Live 2 relies on accurate incoming notes to generate its harmony voicings, it
®
is imperative that your guitar be in tune. The integrated digital tuner of the Vocalist Live 2 makes
tuning your guitar fast and easy. To activate the guitar tuner, simply press and hold the Effects foot-
switch until the Tuner LEDs illuminate.
The Effects LED flashes to indicate that the tuner is turned on. To begin tuning, play a note on
your guitar. The Display shows the note being played. The Tuner LEDs indicate whether you are
sharp or flat. The right five LEDs indicate the note is sharp and should be tuned down. The left
five LEDs indicate the note is flat and should be tuned up. The center green LED below the green
triangle indicates the note is in tune. The guitar signal output is muted while the tuner is active.
Exit the tuner by pressing the Effects footswitch.
Tip: The Vocalist Live 2 "remembers" about 30 seconds of music while you play to determine
the proper harmonies. Entering and exiting the tuner clears this memory. This can be useful when
you're switching between songs with radically different chord progressions.
19