Guitar Thru; Mic/Line Input Level; Mic In; Line In - DigiTech VOCALIST LIVE 2 Owner's Manual

4.

Guitar Thru

Connect a guitar amplifier or powered speaker directly to this output.
5.

Mic/Line Input Level

This knob adjusts the gain of the Mic and Line inputs. Turn clockwise to increase gain, or
counter-clockwise to decrease gain. If the Vocal Signal LED is turning red while you sing,
you need to decrease the Mic gain.
6.

Mic In

Connect a dynamic or condenser microphone to this XLR input. This input is the lead voice
for the Vocalist
7.

Line In

Connect a line input source (mixer, mic preamp, etc.) to this input. When connected to a
source, this input is the lead voice for the Vocalist Live 2, and disables the Mic In XLR input.
8.

Line Out L/R

Connect these balanced/unbalanced outputs to a mixer, powered speakers or P.A. system
if a stereo mix is desired. Only vocal, harmonies, and vocal effects are heard from the Line
Outputs. Harmonies sent through these outputs are panned slightly to the left (Line Out
L) and right (Line Out R).
9.

Mono Out

Connect this XLR balanced output to a powered speaker or mixer if a mono mix is desired.
Only vocal, harmonies, and vocal effects are heard from this output.
10.

Power Input

Connect only the DigiTech
8
Live 2.
®
PS0913B power supply to this jack.
®