Harmony Pitch Shifting; Boss ® Oc-2 Octaver; Delay - DigiTech RP355 Owner's Manual

Harmony Pitch Shifting (HArMnY)
Harmony Pitch Shifting makes a copy of the incoming signal, and then changes the pitch of the
copied note to a diatonically correct interval specified by the Amount parameter. A Harmony
Pitch Shifter sharpens or flattens the shifted pitch in order to keep the specified interval within
the selected key and scale creating a true harmony.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Shift Amount - Knob 3 selects the amount or harmony interval for the Intelligent Pitch
Shifter. Interval choices include:
OCt Dn (octave down)
7tH Dn (a seventh below)
6tH Dn (a sixth below)
5tH Dn (a fifth below)
4tH Dn (a fourth below)
3rD Dn (a third below)
2nD Dn (a second below)
Key - Knob 4 selects the musical key that the Harmony Pitch Shifting uses. Key choices
range from the Key of E (KeY e) through the Key of E (KeY e&).
Scale - Knob 5 selects the scale the Harmony Pitch Shifting will use. Scale choices include:
Major (MAJOr), Minor (MInOr), Dorian (DOrIAn), Mixolydian (MIXLYd), Lydian (LYD-
IAn), and Harmonic Minor (HMInor).
Level - Knob 6 adjusts the Harmony Pitch Shifting Level of all the pitch-altering effects in
this module. Ranges from 0 to 99.
Boss OC-2 Octaver
®
Based on the Boss
The first is one octave below your guitar, and the second is two octaves below your guitar. Each
additional signal has its own volume control.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Octave 1- Knob 3 adjusts the the volume of the signal 1 octave below the input signal.
Ranges from 0 to 99.
Octave 2 - Knob 4 controls the volume of the signal 2 octaves below the input signal.
Ranges 0 to 99.
Dry Level - Knob 6 controls the volume of the dry signal. Ranges from 0 to 99.

Delay

Delay is an effect that records a portion of the incoming signal, and then plays it back a short
time later. The recording can repeat just once or several times.
Delay Model - Knob 1 selects one of the 7 different Delay models. Values include: alg-
dly (DigiTech
dly (DigiTech Digital Delay), moddly (DigiTech Modulated Delay), pngdly (DigiTech
Pong Delay), tapdly (DigiTech Tape Delay), and ecoplx (Based on the Maestro
Echoplex Tape Echo). Press this knob to turn the Delay models on and off.
®
24
(octavr)
TM
OC-2 Octaver , this model adds two signals to your original guitar signal.
® TM
Analog Delay), dm dly (Based on the Boss DM-2 Analog Delay), dig-
®
2nD uP (a second above)
3rD uP (a third above)
4tH uP (a fourth above)
5tH uP (a fifth above)
6tH uP (a sixth above)
7tH uP (a seventh above)
OCt uP (an octave above)
EP-2
TM