Chorus/Fx; Chorus - DigiTech RP150 User Manual

Attack Time - Knob 3 sets the attack time. Ranges from 0 (shorter attack time) to 99
(longer attack time).
Release - Knob 4 sets the Release parameter. Ranges from 0 to 99.
Attenuation (X-Edit
99.

Chorus/FX

The Chorus/FX row in the RP150 is a multi-function module, allowing you to select Effect models
such as Chorus, Flanger, Phaser, Tremolo, Panner, Vibrato, Rotary Speaker, YaYa™, AutoYa™,
SynthTalk™, Envelope Filter (auto wah), Detune, Pitch Shift, and Whammy™ effects. When the
Chorus/FX row is selected, Knob 1 is used to choose the Effect model. Press this knob to turn
these Effect models on and off. Only one of the effects in this row can be used at a time. After
selecting the type of effect in this module, Knobs 2-4 can then be used to adjust the individual
parameters associated with the selected effect. The following list describes each Effect model and
its parameters in more detail:
Chorus (CH)
A Chorus adds a short delay to your signal. The delayed signal is modulated in and out of tune and
then mixed back with the original signal to create a thicker sound. The RP150 includes the fol-
lowing Chorus Effect models: CE (based on the classic Boss
Chorus), and MC (DigiTech's famous Multi Chorus
Speed - Knob 2 adjusts the rate (Speed) of the modulation. Ranges from 0 to 99.
Depth - Knob 3 adjusts the Depth of the modulation. Ranges from 0 to 99.
Level - Knob 4 controls the level of the effect (DigiTech Chorus models only). Ranges
from 0 to 99.
Waveform (X-Edit
Sq (Triangle, Sine, or Square).
only) - Knob 5 sets the Attenuation parameter. Ranges from 0 to
TM
only for DigiTech Chorus models) - Selects a waveform: tr, Si, or
TM
CE-2 Chorus), DC (DigiTech
®
).
®
's Dual
®
27