Expression Pedal - DigiTech BRIAN MAY RED SPECIAL PEDAL Owner's Manual

4. We Will Rock You/Champions
5. Crazy Little Thing Called Love
6. Brighton Rock Solo - Live
7. Deacy / A Winter's Tale
Refer to the Model Descriptions
section for more information.
9. INPUT
Connect your guitar to this jack.
10. FOOTSWITCH
Plug in the optional FS3X
footswitch here. Refer to the
Using the Optional FS3X
Footswitch section to see what
the FS3X can do with the Red
Special Pedal.

11. EXPRESSION PEDAL

Serves as a variable control for
some of the Models. Also used
for engaging the TOE SWITCH
and the HEEL SWITCH (which
enable different modes within each
Model). Refer to the Model Con-
trol table for more information
about the EXPRESSION PEDAL.
To engage the HEEL or TOE
SWITCHES, press firmly on the
heel or toe of the EXPRESSION
PEDAL. The INDICATOR LED
will light green when the TOE
SWITCH is engaged or red when
the HEEL SWITCH is engaged.
If the EXPRESSION PEDAL's
range becomes diminished over
time, it may be necessary to re-cali-
brate the pedal. Refer to the
Calibrating the Expression Ped-
al section for more information.
The Guitar Knob
The Red Special Pedal was designed to work
in conjunction with Brian's Red Special guitar,
but it can also be used with single-coil or
humbucker-equipped guitars.
The pedal's proprietary Guitar Knob (outer
ring, second knob from the right) uses Guitar
Modeling technology to transform your
guitar's tone to sound more like Brian's.
If your guitar has single coil pickups (like a
Stratocaster ), turn the Guitar Knob to SC.
TM
If your guitar has humbucking pickups (like
a Les Paul ), turn the Guitar Knob to HB. If
TM
you're playing a Red Special replica, turn the
Guitar Knob to Red Special.
Note that you can fine tune the Guitar
Knob's position between the HB and the Red
Special settings, and between the SC and the
Red Special settings (they are ranges). But the
Red Special setting itself is a single point (not
a range).
Guitar Knob
(outer ring)