Stereo Operation - DigiTech BP50 User Manual

Stereo Operation

For stereo operation connect the bass to the Input of the BP50. Connect a TRS stereo "Y"
cord or a pair of stereo headphones to the BP50's Output. When using a "Y" cord, connect
one end of the "Y" cord to the input of one amplifier or channel of a mixer. Connect the
second end of the "Y" cord to a second amplifier, or second channel of a mixer. If
connecting to a mixing console, set the pan controls of the mixer hard left and right to
retain stereo separation. To emulate a bass cabinet sound when using the BP50 with a
mixer or headphones, you can use Global Cabinet Modeling (see page 20).
Bass Amp Input / Effect Return
Headphones or
Stereo TRS "Y" Cable
Connected to Output
Input
6