Advertisement
Quick Links
Advertisement
Related Manuals for DigiTech DIGIVERB
Summary of Contents for DigiTech DIGIVERB
-
Page 2: Declaration Of Conformity
European Contact: Your local DigiTech Sales and Service Office or not operate normally, or has been dropped. 11.WARNING:To reduce the risk of fire or electric... - Page 3 6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tam- pered with by anyone other than a certified DigiTech technician or, if the product is used with AC volt- ages outside of the range suggested by the manufacturer.
- Page 4 When the Level knob is set to its maximum position, the dry signal is completely removed so the DigiVerb can run in an effects loop of a mixer.
- Page 5 2 3 4...
- Page 6 3. AC Adapter Jack Connect a DigiTech PS200R power supply to this jack. Use the proper supply for your area’s Mains line voltage. 4. Decay Knob Controls the amount of reverb decay time. Turn the knob clockwise to increase the decay time and counter-clockwise to decrease the decay time.
-
Page 7: Indicator Led
11. Out 2 Jack Connect this output to a second amplifier for stereo reverb. Stereo is the best way to get the most effective reverb experience from the DigiVerb pedal. - Page 8 Connections The DigiVerb has a single input and a pair of outputs. Out 1 is used if the DigiVerb is being connected to only one amplifier. Out 2 is used for stereo operation. Connect Out 1 to amplifier 1 or the input of a mixer channel and Out 2 to amplifier 2 or the input of another mixer channel.
-
Page 10: Battery Replacement
To Enable CIT™ Cabinet Modeling: Press the pedal down and apply power by connecting a guitar cable to the DigiVerb input or connecting the PS200R power supply to the AC adapter jack. CIT™ cabinet modeling has to be enabled each time you apply power to the DigiVerb. - Page 11 Pedal Pedal Switch 9V DC Battery Pedal Release Battery Compartment Pedal Release Spring Pedal Chassis...
-
Page 12: Specifications
• Input Impedance - 1 MOhms FAX (801) 566-7005 • Output Impedance - 100 Ohms • Power Supply - 9V Alkaline Dry Battery DigiTech and X-Series are trademarks of the Harman Music Group Inc. • Power Consumption - 4.8Watts (w/optional PS200R power supply) Copyright - Harman Music Group •...