Section Two - Getting Started; Making Connections; Mono Operation - Amplifier; Stereo Operation - DigiTech BP355 Owner's Manual

Section Two - Getting Started

Making Connections

There are several different connection options available with the BP355. Before connecting the
BP355, make sure that the power to your amplifier and the BP355 is turned off. There is no
power switch on the BP355. To turn the BP355 on or off, connect or disconnect the included
PS0913B power supply from the Power Input jack.

Mono Operation - Amplifier

Connect your bass to the Input of the BP355. Connect a single mono instrument cable from
the Left (Mono) output of the BP355 to the instrument input or effect return on your ampli-
fier. Set the ¼˝ Amp/Mixer switch to Amp.

Stereo Operation

For stereo operation connect the bass to the Input of the BP355. Connect one cable to the
BP355's Left (Mono) output, and another cable to the BP355's Right output. Connect one
cable to the input of one amplifier, channel of a mixer, or power amp. Connect the second
cable to a second amplifier, second channel of a mixer, or power amp. If connecting to a mixing
console, set the pan controls of the mixer channels hard left and right in order to retain stereo
separation. If connecting to a mixer, set the ¼˝ Amp/Mixer switch to Mixer. If connecting to
two amplifiers, set the ¼˝ Amp/Mixer switch to Amp.

Stereo Amp Setup

8
¼" Amp/Mixer
switch set to "Amp"
¼" Left (Mono) Output
Input
Bass Amp Inputs/
Effect Returns
¼" Left (Mono)
Output
Input
¼" Amp/Mixer
switch set to "Amp"
Bass Amp Input/
Effect Return
¼" Right Output