Changing The Water Filter; Making Coffee - Cuisinart DGB-475 - Corp 10 Cup Grind Instructions Manual

programmed either before or during coffee
brewing. You may also re-program the ASO
time when brewing has been completed. If you
do so, the Grind & Brew
account for any time that has already elapsed
after brewing. For example, if you set the ASO
for 40 minutes and 25 minutes have already
elapsed, the Grind & Brew
matically after 15 minutes (40 minutes minus
the 25 elapsed equals 15 minutes).
Turning off Grind Function
To turn off the grinding function, press the
Grind Off button. An amber LED will be
illuminated. Then press the On button.
CHAnGInG tHe
WAter fILter
a. Remove the filter from polybag and soak
in cold tap water for 15 minutes.
b. Remove the water filter holder from
the coffeemaker by lifting it out of
the reservoir area with your thumb
and forefinger.
c. Grasp stem in one hand. Using thumb of
other hand, gently press down and pull
toward you. Compartment will flip open.
d. Place the filter in the holder and close the
water filter holder; you will hear a snap
indicating it is in place.
will automatically
™
will shut off auto-
™
note: Caution must be used when inserting
the charcoal filter. Improper placement in the
holder can cause tearing of the filter skin.
e. Hold the filter under cold running tap
water for 10 seconds to flush. You should
place the hole openings in the side of the
unit directly under the water stream.
f. Allow the filter to drain completely.
g. Replace the water filter holder in the
reservoir area of the coffeemaker, pushing
it all the way down to the base of the unit,
along the reservoir wall.
note: We recommend changing the water
filter every 60 days or 60 uses, more often
if you have hard water. Replacement water
filters can be purchased in stores or by
calling customer service or through the
Cuisinart web site.

mAKInG Coffee

Before you make the first pot of coffee in your
new Cuisinart Grind & Brew
®
coffeemaker, we recommend operating the
coffeemaker once, using only water and a
paper filter. This will remove any dust or
residues which remain in the system from
the manufacturing process.
1. fill the Water reservoir
Open the reservoir lid by pushing the release
button and lifting up. Pour the desired amount
of water in the reservoir using the step water
indicator located at the rear of the reservoir.
2. Add Beans
Lift the grinder basket lid, using the recess
on either side. Fill the basket with the desired
quantity of beans.
Use 1 level scoop of whole beans per cup.
For 1 to 4 cups, use 1½ level scoops per cup.
maximum capacity for whole beans is 14
level scoops. Do not overfill or the grinder
could malfunction and/or the coffeemaker
may overflow. This is our suggested recipe.
Adjust the recipe to taste.
3. open filter Door
Place a #4 basket paper filter or Cuisinart's
commercial style permanent filter in
the basket.
Automatic
™
®
9