Table of Contents
Advertisement
12
AutoView 1400/1500/2000 Installer/User Guide
To connect local peripherals:
1.
Select the keyboard, monitor and mouse to be connected to local user A.
2.
Locate the port set labeled A on the back of the switch. Connect these peripherals to their
respective ports.
3.
For the multiuser, 16-port AutoView switch, repeat steps 1 and 2 for the local analog port set
labeled B.
- or -
For the AutoView 1400/1500 switch, proceed to step 4.
4.
Bundle and label the cables for easy identification.
Setting Up Your AutoView Switching System
The AutoView switching system enables you to auto detect and configure each port on your
appliance. Chapter 3 provides detailed instructions on name customization and OSCAR interface
setup and configuration.
Advertisement
Table of Contents
