BenQ DV3250 User Manual page 40

Aspect
Adjust image aspect
ratio.
Ratio
Select video signal input
Video
source for PIP/PBP
Input
function.
Select graphics signal
Graphics
input source for PIP/
Input
PBP function.
Reset All
Restore all settings to
Settings
default values.
PIP/PBP Functions are available with 480p, 576p, 720p, 1080i HDTV formats.
32 On-Screen Display (OSD) Menu
Use the and buttons on
the remote control or the
VOL and VOL buttons
on the display to change
selection.
Use the and buttons on
the remote control or the
VOL and VOL buttons
on the display to change
selection.
Use the and buttons on
the remote control or the
VOL and VOL buttons
on the display to change
selection.
Press the ENTER button on
the remote control or the
INPUT button on the display
to reset.
• Full Screen - Enlarge the
standard 4:3 video signal (e.g.
TV signal) to 16:9 full screen
video signal. When the
original input video source is
16:9 in ratio (e.g. DVD signal),
no change will occur.
• 4:3 Format - Display the
standard 4:3 video signal (e.g.
TV signal) in the center of the
screen at the ratio of 4:3. The
screen does not change, but
black blocks appears in the left
and right sides of the screen.
When the input video source
is 16:9 in ratio, deformation
will occur on the screen.
• Letterbox -Fill the entire 4:3
screen with a 4:3 video signal.
The redundant part on the
upper and bottom of the
image will be removed and the
image will extend vertically
and horizontally to fill the full
screen. When the input video
source is 16:9 in ratio (e.g.
DVD signal), no change will
occur.
• Anamorphic - Fill the entire
screen with a 4:3 video signal.
Some deformations may be
identified on the edge of the
image. When the input video
source is 16:9 in ratio (e.g.
DVD signal), no change will
occur.
• Real - Display the actual size
of the video source without
zooming.
TV, AV1, AV1-S, AV2, AV2-S,
AV3, AV3-S
AV1-S, AV2-S or AV3-S will
appear only when the S-
Video input of AV-1, AV-2 or
AV-3 is connected.
• PC
• Component 1
• Component 2
• DVI