FUTABA GY601 Instruction Manual page 27

(Setting Example)
Adjust the gyro gain at each the Idle-Up swtch position at the Gyro Mixing
setup screen. The following shows a setting example in the CMT mode.
Select the "ON"
mode.
Switch position
Set the "NORM", "IDL1" and "IDL2" gains at each setup screen.
Use the following values as the sensitivity setting standard:
AVCS mode
Normal mode
When set over 50%, the GY601 operates in the AVCS mode and when
set under 50%, the GY601 operates in the Normal mode.
NORM
SW-E
Hovering
85%
15%
Actual gain
70%
D S
ATA ETTING
Select the Idle-Up
switch(SW-E).
Sensitivity rate
IDL1 IDL2
Flight
70%
30%
40%
27