FUTABA GY601 Instruction Manual page 17

Rudder Control Gain
Adjusts the rudder stick operation gain. Setting range is 10% to
250%.
AVCS and NOR mode gain can be set independently. In the AVCS
mode, ACG is displayed and in the NOR mode, NCG is displayed.
The display automatically changes to A or B according to the
direction of the rudder stick and the gain of each direction can be set.
This function is used when tracking rudder operation gain between
the AVCS and NOR modes.
Control Delay I
Sets the delay when the rudder stick was pushed operated. Setting
range is 0 to 100%. Rudder stick left and right can be set separately.
Control Delay D
Sets the delay when the rudder stick was returned. Setting range is 0
to 100%. Rudder stick left and right can be set separately.
D
Initial value : ACG: 120%, NCG: 130%
S
ATA ETTING
Initial value : 0%
Initial value : 0%
17