FUTABA 3VCS Instruction Manual page 82

Calling the setup screen
* Calling from menu screen
(Initial screen)
Use the or
button to select the
menu screen.
MENU
Press the button.
MENU SELECT
Use the or
button to select the
function.
Press the button.
* When the direct call button is set,
the setup screen is also called by the
following method:
(Initial screen)
Press the and
button simulataneously.
DIRECT SEL
Press the button set
at this function.
Function select switch setup
1 (To select a function for SW1)
Press (UP) button or (DN) button to select
"SW1". Then, select one of the functions for
SW1 by pressing (+) or (-) button.
-
Refer to the previous page for abbreviations of functions.
2 (To change the operation mode of SW1)
Press (DN) button once to move the cursor to the
"NOR" or "ALT" message. Now, press (+) or (-)
button to select either "NOR" or "ALT".
3 (To select an arrange type for SW2)
Press (UP) button or (DN) button to select "AR-
RANGE". Then, select one of the three, "AR-
RANGE-1", "ARRANGE-2" and "ARRANGE-3"
by pressing (+) or (-) button.
-
Refer to the previous page for ARRANGE types.
4 (To select a function for SW2)
Press (UP) button or (DN) button to select
"SW2". Then, select one of the functions for SW2
by pressing (+) or (-) button.
-
Refer to the previous page for abbreviations of functions.
5 (To end setting)
Press (END) button three times to return to the
Initial Screen. (Press once in case of Direct
Mode.)
Use the or button to
select the setup item.
* blinks at the current
setup item.
Function selection
Arrange selection
Switch position
Function select switch/FUNC-SW
* Setup item shifts in function -> direc-
tion of operation order.
Direction of operation setting (NOR/ALT)
83