FUTABA 3VCS Instruction Manual page 107

LCD screen:
Data Pac Error
If data transfer with the Data Pac was not performed normally, an audible alarm will
sound and "ACCESS ERROR" will be displayed on the LCD screen.
- To stop the alarm, turn off the power.
- Turn the power back on. If the alarm is not generated, there is no problem.
LCD screen:
Memory Error
If the data in the transmitter is not transferred normally when the power is turned on,
an audible alarm will sound and "ACCESS ERROR" will be displayed on the LCD.
- To stop the alarm, turn off the power.
- Turn the power back on. If the alarm is not generated again, there is no problem.
LCD screen:
Idle-Up or Preset Warning
When the power switch is turned on while the idle-up or preset (engine cut) function
switch is on, an audible alarm will sound and "MIX WARNING" will be displayed
on the LCD. When the idle-up function switch is turned off, the alarm will stop.
LCD screen:
108
Audible alarm:
Tone sounds (7 times) and stops
(repeated)
Audible alarm:
Tone sounds (7 times) and stops
(repeated)
Audible alarm:
Tone sounds (7 times) and stops
(repeated)
Audible alarm:
Tone sounds (7 times) and stops
(repeated)