Testing Your Tools - Wacom INTUOS4 WIRELESS Manual

TESTING YOUR TOOLS

If an input tool does not work as you expect, first open the Wacom Tablet control panel and check the
assigned functions or reset the tool to its default condition.
To quickly return a tool to the default settings, remove it from the T
list's [ – ] button. After the tool has been removed, place it back onto the tablet. The tool will be added
back to the T list with its default settings.
OOL
To test your input tools:
• In the Wacom Tablet control panel, click on the A
the D ... button. The D
IAGNOSE
tablet hardware and pointing devices, including the battery status of the currently selected tablet.
• If you have more than one tablet connected to your system, in the T
for which you are testing your tool.
• Use the information presented in the D
Note: When testing your tool buttons, if a button is set to R
occur when the button is pressed. In this case you may want to change that button function before
testing.
Contents Index
dialog box displays to show dynamic information about the
IAGNOSTICS
IAGNOSTICS
Contents Index
list by clicking on the control panel
OOL
button. In the dialog box that appears, click on
BOUT
ABLET
dialog box when testing your tablet and tools.
M or O
ADIAL ENU
Testing a pen
Testing the Touch Ring
Testing the ExpressKeys
Testing the optional mouse
I column select the tablet
NFO
/R ..., that function will
PEN UN
66
66