Mounting The Cintiq21Ux On The Stand; Using The Tablet In A Face-Up Position - Wacom DTZ-2100D - 2005 User Manual

Mounting the Cintiq21UX on the Stand

The product may be positioned vertically and secured to the stand so that it is at a
convenient angle (see page 18) after full stop. Set the product on the stand so that it is in
a vertical position. Fasten it to the stand with the stand-securing screws (see page 9) so
that it does not rotate

Using the Tablet in a Face-Up Position

The tablet may be removed from the stand, and used face up on a desktop or other
suitable surface. For this type of use, the cable position needs to be adjusted so that
it sticks out of the top of the
tablet.
T urn the tablet over so that it
1
is face down.
To avoid scratching or otherwise
damaging the display, first lay a
cushion or other soft material out,
and then place the unit face down
on top.
Remove the screws holding
2
the shaft bearing in place.
Cin21UX_EN .indd 19
3
2
large cover
cushion
19
09.7.29 9:50:43 AM