Storage > Media Server - Linksys WRT350N - Wireless-N Gigabit Router User Manual

Chapter 3
Create New User Click the Create New User button to
create a new user. On the User Properties screen, enter
a name for the user. Then enter a password and enter it
again in the Re-enter to confirm field. Select a group from
the Group drop-down menu. Click the Create User button
to save the new properties, or click the Clear button to
clear the changes. Click the Cancel button to cancel the
changes.
Group Management
The groups are listed in the Group Management table.
There are two default groups, admin and guest; these
cannot be deleted.
Storage > Group
Properties
Modify Click the Modify button to change the user
membership of a group. On the Group Properties screen,
users who are not members are listed in the Other Users
column, and users who are members are listed in the Users
in Group column. To add a user to the group, select the user,
and click the Join Group button. To remove a user from the
group, select the user, and click the Remove button. Click
the Save Settings button to save the changes, or click the
Cancel Changes button to cancel the changes. Click the
Close button to exit the Group Properties screen.
Delete Click the Delete button to remove a user.
Create New Group Click the Create New Group button
to create a new group. On the Group Properties screen,
enter a name for the group. Click the Create Group
button to save the new name, or click the Clear button
to clear the change. Click the Cancel button to cancel the
change.
Wireless-N Gigabit Router with Storage Link
Advanced Configuration
Storage > Media Server
An external USB hard drive or USB disk must be connected
to the USB Port of the Router to use the storage feature.
Storage > Media Server
Setup
Server Name
The name of the router's media server
is displayed here. It can be changed at Storage >
Administration..
UPnP Media Server To use the Router's media server
function, select Enable. Otherwise, select Disable.
Database
Select content to add to the database of the Router's
media server.
Scan All Partitions Click this button to scan all partitions
of the USB hard disk for content.
Select Partitions to Scan
specific partitions to scan for content.
The Partition and Folder columns describe the partitions
of the USB hard disk.
Scan Click the Scan button to scan a specific partition
for content. The Partition List screen will appear. Click the
Select button to select a partition for scanning. Click the Up
List button to move up one level in the file structure. Click
the Refresh button to update the on-screen information.
Click the Close button to exit the Partition List screen.
Storage > Partition List
Click this button to select
17