Storage > Administration - Linksys WRT350N - Wireless-N Gigabit Router User Manual

Chapter 3
Share Management
Shares
The Share Name, Partition, and Total Space columns
describe the shares.
Properties
Modify Click the Modify button to change the properties
of a share. On the Share Properties screen, enter a different
name for the share, and/or select a different partition
from the Resides in Partition drop-down menu. Click the
Create Share button to save the new properties, or click
the Clear button to clear the changes. Click the Cancel
button to cancel the changes.
Share Access
Modify Click the Modify button to change the access
privileges of a share. On the Share Access screen, groups
with no access are listed in the Other Group column, and
groups with access are listed in the Group with Access
column. To give a group read-only access, select the group,
and click the Read Only button. To give a group read/
write access, select the group, and click the Read/Write
button. To strip a group of its current access privileges,
select the group, and click the Remove button. Click the
Save Settings button to save the changes, or click the
Cancel Changes button to cancel the changes. Click the
Close button to exit the Share Access screen.
Delete Click the Delete button to remove a share.
Create Share
Create New Share Click the Create New Share button to
create a new share. On the Share Properties screen, enter a
name for the share, and select a partition from the Resides
in Partition drop-down menu. Click the Create Share
button to save the new properties, or click the Clear
button to clear the changes. Click the Cancel button to
cancel the changes.
Wireless-N Gigabit Router with Storage Link
Advanced Configuration
Storage > Administration
The Administration screen allows you to manage the users
and groups of users that can access the shares.
Storage > Administration.
Basic
Machine Name.
Enter a name for the Router. Punctuation
and other special characters (e.g., * / | \) cannot be used in
the name.
Workgroup Name Enter the Workgroup Name of your
networked computers.
After you have made your changes, click the Save Settings
button to apply your changes, or click the Cancel Changes
button to cancel your changes.
User Management
The users are listed in the User Management table. There
are two default users, admin (read/write access) and guest
(read-only access); these cannot be deleted.
Properties
Modify Click the Modify button to change the properties
of a user. On the User Properties screen, enter a different
name for the user, change the password, and/or select a
different group from the Group drop-down menu. Click
the Create User button to save the new properties, or click
the Clear button to clear the changes. Click the Cancel
button to cancel the changes.
Delete Click the Delete button to remove a user.
16