Table of Contents
Advertisement
Obtaining the Access Point Image File
Step 8
Enter the file name for the access point image file (c1100-k9w7-tar.122-13.JA.tar) in the Upload New
System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory,
include the relative path of the TFTP server root directory with the filename. If the file is located in the
TFTP root directory, enter only the filename.
Click the Upload button.
Step 9
When a message appears that indicates the upgrade is complete, click OK.
Step 10
For additional information click the Help icon on the Software Upgrade screen.
Obtaining the Access Point Image File
The access point image file can be obtained from the Cisco.com software center using the following
steps:
Step 1
Use your Internet browser to access the Cisco Software Center at the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2
Click Option 2: Aironet Wireless Software Display Tables.
Step 3
Find the access point firmware and utilities section and click Cisco Aironet 1100 Series.
Click on the desired access point image file such as c1100-k9w7-tar.122-13.JA.tar.
Step 4
On the Encryption Authorization Form, enter the requested information, read the encryption
Step 5
information, and check the boxes that apply.
Click Submit.
Step 6
Read and accept the terms and conditions of the Software License Agreement.
Step 7
Select the image file again to download it.
Step 8
Step 9
Download the access point image file to a directory on your PC hard drive.
Obtaining the TFTP Server Software
You can download TFTP server software from several websites. Cisco recommends the shareware TFTP
utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
8-8
Chapter 8
Troubleshooting
OL-4309-02
Hide quick links:
Advertisement
Table of Contents
