D-Link DBT-122 Manual page 59

Troubleshooting
Determine the Bluetooth Device Address (BDA) of
my hardware device
In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices
section, select the device you want to determine the address of. In the
Device Properties section of the dialog box, the fourth entry, Device Address,
is the BDA of the selected Bluetooth device.
Determine the version of the Host Controller
Interface (HCI)
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device
Properties section, the fifth entry provides Bluetooth Specification
compliance information for the Host Controller Interface.
The sixth entry contains the Specification Revision information for the Host
Controller Interface, if appropriate.
Determine the version of the Link Manager
Protocol (LMP)
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device
Properties section, the seventh entry provides Link Manager Protocol
version number information. The eighth entry contains the Link Manager
Protocol sub-version number information, if appropriate.
Find information about the Bluetooth hardware
attached to my computer
In the Bluetooth Configuration Panel, select the Hardware tab.
Internet Connection Sharing Does Not Work
This occurs because Internet Connection Sharing was enabled when
Bluetooth was installed (this is a Microsoft Windows behavior and is
considered proper operation).
To resolve the "problem":
1. Disable Sharing for the Ethernet adapter:
a) Windows Control Panel > Network and Dial-up Connections.
b) Right-click "Local Area Connection," select Properties, and then
c) Clear (uncheck) the box for "Enable Internet Connection Sharing
(cont'd)
select the Sharing tab.
for this connection" and click OK.
59