Applications > Network Access - D-Link DBT-122 Manual

Bluetooth Configuration
Applications > Network Access
Network Access
Overview
The Bluetooth Network Access application makes it possible for this
computer:
•
To connect to a Local Area Network via a physical connection on a
remote Bluetooth device.
or
•
To connect to an ad hoc network provided by a remote Bluetooth
device.
The type of network connection that is available is determined by the
configuration of the remote Bluetooth device.
Create a Network Access connection
Establish a connection using one of these techniques
•
Windows system tray, Bluetooth icon
•
From My Bluetooth Places
•
Using the Bluetooth Setup Wizard
Close a Network Access connection
•
If the connection was established via the Bluetooth icon in the
Windows system tray; click the Bluetooth icon, select Quick
Connect, Network Access and then select the device that is
providing the service (active connections have a checkmark in front
of them).
or
•
No matter how the connection was created, In My Bluetooth Places,
right-click the service name and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Network Access >
General tab provides options to configure:
•
The application name—to change it, highlight the existing name and
enter the new name.
•
Enable or disable secure connection. To enable secure connection,
place a checkmark in the box.
(cont'd)
3